Highly cost-effective with low product wastageEffective in fresh, saline & hard water environmentsReduces filtration rates and rod vibrationsEnhances borehole stability and lubricityInhibits water-sensitive formations (shales/clays)Compatible with most water-based mud systemsImproves core recovery and penetration ratesCan be used as a single-sack polymer systemEasy mixing under low shear conditionsHighly cost-effective with low product wastageEffective in fresh, saline & hard water environmentsReduces filtration rates and rod vibrationsEnhances borehole stability and lubricityInhibits water-sensitive formations (shales/clays)Compatible with most water-based mud systemsImproves core recovery and penetration ratesCan be used as a single-sack polymer systemEasy mixing under low shear conditions
Using mechanical agitation
Through a water discharge
Via a standard mud hopper
| Application | Dosage (L/m³) |
|---|---|
| To reduce torques and improve core recovery |
5.0–12.5 |
| To improve fluid loss inhibition and encapsulation |
7.0–9.0 |
| When used in salt systems | 7.5–10.0 |
Rapid Dispersion – Mixes quickly with any water, reducing prep time. Improves Core Recovery – Inhibits water-sensitive zones for better sampling. Minimizes Friction – Reduces rod vibration and differential sticking. Eco-Friendly – Non-polluting and safe for the environment. Cost-Effective – Cuts mud and overall drilling costs.
| Application | Dosage (L/m³) |
|---|---|
| To reduce torques and improve core recovery |
1.0–3.0 |
| Stabilize clays/shales via encapsulation |
2.0–5.0 |
| Enhance filter cake quality | 1.5–2.5 |
Biodegradable & Safe for Environment Stable Foam Formation at Low Dosage Works in All Water Types – Fresh, Brackish, Hard Reduces Erosion in Soft or Loose Formations Enhances Penetration Rates & Hole Cleaning Cuts Down Air Requirements, enabling deeper drilling Suppresses Dust Effectively in Surface Zones Compatible with Polymers for extended foam drilling systems
| Mist Drilling | Foam Drilling | Air Drilling |
|---|---|---|
| Indorock Superfoam should be mixed with water at 0.25–0.5 percent by volume and injected into the air stream. The rate of injection will depend on hole size, compressor output and water flow rate etc. | If water flow rates are high and compressor limits are reached, up to 1.0–2.0 by volume of Indorock Superfoam. | Indorock Superfoam can be used as an effective dust suppressant, at 0.1 – 0.2 percent by volume injection water. |
Indorock is committed to delivering safe, efficient, and eco-conscious drilling solutions. Supermix Liquid is formulated with non-toxic components, reducing environmental risks without compromising performance.
Contact our technical team for application support, safety sheets, or distributor pricing.
